# Physics: Senior High School: 11th and 12th Grade Quiz - Radioactivity - Nuclear Fission (Questions)

This Physics quiz is called 'Radioactivity - Nuclear Fission' and it has been written by teachers to help you if you are studying the subject at senior high school. Playing educational quizzes is one of the most efficienct ways to learn if you are in the 11th or 12th grade - aged 16 to 18.

It costs only \$12.50 per month to play this quiz and over 3,500 others that help you with your school work. You can subscribe on the page at Join Us

Fission means to split so during the process of nuclear fission atomic nuclei split. This process releases energy, which can be used to heat water and turn it into steam. The steam drives a turbine, which is connected to a generator which produces electricity that can be fed into the National Grid. Electricity generated in this way is often referred to as 'nuclear power'.

Generating electricity from nuclear reactions has the advantage that the process does not release any carbon dioxide or nitrogen and sulfur oxides. These gasses contribute to the environmental problems of global warming and acid rain. Although nuclear power stations are less polluting for the atmosphere, there are other problems such as how to make sure no radiation escapes into the environment and how to safely dispose of the used nuclear fuel which is highly radioactive.

The two main fuels for nuclear power stations are the isotopes uranium-235 and plutonium-239. They are used because, when the nucleus of either isotope is hit by a neutron, they become unstable and split. We say that the two isotopes are fissionable. During fission, the nucleus splits into two smaller nuclei (referred to as daughter nuclei) and emits some neutrons, usually either two or three. Where you had one neutron to begin with, you end up with two or three. As well as this, some energy is released in the form of heat and gamma radiation.

One of the tasks you may be asked to do in the senior high school exam is to balance an equation involving nuclear fission. This is simply testing if you understand the principle of conservation of matter. Take for example the fission of a plutonium-239 nucleus. If this was hit by a neutron, two possible products of the fission would be cerium-148 and krypton-89 so how many neutrons would be produced? To work this out, you need to use your knowledge of atomic structure. The number 239 indicates that the nucleus of plutonium contains a total of 239 particles. One neutron is needed for the fission to occur so on the left hand side of the equation there are 240 particles in total. That means there must also be 240 particles on the right hand side too. Adding together the 148 particles of the cerium and the 89 of the krypton gives 237 so 3 neutrons are released.

The neutrons released in nuclear fission reactions will then hit other atoms and cause them to split and so on. This is called a chain reaction. If this is not controlled, it very quickly gets out of hand creating a nuclear explosion, that is how the first atomic bombs worked. Later, more powerful hydrogen bombs were developed - these work differently. In the core of a nuclear power station, the neutrons released during nuclear fission are carefully controlled by absorbing them using special control rods. If the neutrons are moving too fast or too slowly, fission will not occur - water is used in some types of reactor as a moderator to ensure that as many neutrons as possible are moving at the correct speed to keep the reaction going in the core.

1. Which two fissionable substances are commonly used in nuclear reactors?
 [ ] Uranium and plutonium [ ] Carbon and oxygen [ ] Neon and lithium [ ] Boron and hydrogen
2. What is nuclear fission?
 [ ] It is the process by which stars generate light and heat [ ] Fission is the splitting of an atomic nucleus creating two smaller atomic nuclei [ ] Fission is the fusion of two atoms to create a heavier atom [ ] Fission is the process by which electrons are removed from an element
3. What must a nucleus absorb for fission to occur?
 [ ] Proton [ ] Neutron [ ] Electron [ ] Heat
4. What happens to the atom after it absorbs a neutron?
 [ ] The atom becomes unstable and decays into two smaller atoms releasing more neutrons and energy [ ] It loses an electron [ ] It loses a proton [ ] The neutron is ejected
5. What happens to the excess neutrons?
 [ ] They decay into protons and electrons [ ] They decay into electrons [ ] They are absorbed by other atoms creating more atoms to split into smaller atoms [ ] They bond with other free neutrons to create a large neutron mass
6. In nuclear power stations, a chain reaction is required. What is a chain reaction?
 [ ] Reactions in which one reaction causes further reactions, which cause further reactions etc. [ ] Reactions in which when the first reaction has occurred others are prevented [ ] Reactions in which when a certain number of reactions have occurred others are prevented [ ] Reactions which will never stop
7. In a nuclear reactor, water is used as a moderator. What is a moderator?
 [ ] A substance which speeds up a nuclear reaction [ ] A substance which slows down the fission neutrons [ ] A substance which slows down the production of electricity [ ] A substance that absorbs surplus neutrons
8. If Uranium-235 and one neutron are collided together they can create one Kr92 and 1 Ba142. In this circumstance, how many free neutrons are released in this reaction?
 [ ] 1 [ ] 2 [ ] 3 [ ] 4
9. What is an advantage of nuclear fission?
 [ ] It creates radioactive material [ ] A low percentage of energy is output compared to energy input into the process [ ] A large amount of fissionable material is needed [ ] A small amount of fissionable material is needed
10. What is a disadvantage of nuclear fission?
 [ ] It creates radioactive waste [ ] A large amount of fissionable material is needed [ ] It produces vast amounts of energy [ ] Nuclear power plants are cheap to build
1. Which two fissionable substances are commonly used in nuclear reactors?
 [x] Uranium and plutonium [ ] Carbon and oxygen [ ] Neon and lithium [ ] Boron and hydrogen
Not all isotopes of these two elements are fissionable
2. What is nuclear fission?
 [ ] It is the process by which stars generate light and heat [x] Fission is the splitting of an atomic nucleus creating two smaller atomic nuclei [ ] Fission is the fusion of two atoms to create a heavier atom [ ] Fission is the process by which electrons are removed from an element
The smaller nuclei are called daughter nucleides
3. What must a nucleus absorb for fission to occur?
 [ ] Proton [x] Neutron [ ] Electron [ ] Heat
For fission to occur, neutrons are fired at the atomic nucleus
4. What happens to the atom after it absorbs a neutron?
 [x] The atom becomes unstable and decays into two smaller atoms releasing more neutrons and energy [ ] It loses an electron [ ] It loses a proton [ ] The neutron is ejected
The neutrons released start a chain reaction
5. What happens to the excess neutrons?
 [ ] They decay into protons and electrons [ ] They decay into electrons [x] They are absorbed by other atoms creating more atoms to split into smaller atoms [ ] They bond with other free neutrons to create a large neutron mass
As more neutrons are created by the fission reaction, more atoms absorb the now-free neutrons creating an avalanche effect until all of the fissionable material is used
6. In nuclear power stations, a chain reaction is required. What is a chain reaction?
 [x] Reactions in which one reaction causes further reactions, which cause further reactions etc. [ ] Reactions in which when the first reaction has occurred others are prevented [ ] Reactions in which when a certain number of reactions have occurred others are prevented [ ] Reactions which will never stop
It keeps going without the need for any extra help
7. In a nuclear reactor, water is used as a moderator. What is a moderator?
 [ ] A substance which speeds up a nuclear reaction [x] A substance which slows down the fission neutrons [ ] A substance which slows down the production of electricity [ ] A substance that absorbs surplus neutrons
If the neutrons are moving too quickly, fission will not occur
8. If Uranium-235 and one neutron are collided together they can create one Kr92 and 1 Ba142. In this circumstance, how many free neutrons are released in this reaction?
 [ ] 1 [x] 2 [ ] 3 [ ] 4
This question required you to balance the chemical equation in terms of the number of nuclear particles. There are 236 particles to begin with, so there must be 236 after the fission. Always remember that you will always have the same amount of particles on either side of the reaction. What goes in must always come out!
9. What is an advantage of nuclear fission?
 [ ] It creates radioactive material [ ] A low percentage of energy is output compared to energy input into the process [ ] A large amount of fissionable material is needed [x] A small amount of fissionable material is needed
When compared with the amount of fossil fuel needed to release the same amount of energy, it is a tiny fraction
10. What is a disadvantage of nuclear fission?
 [x] It creates radioactive waste [ ] A large amount of fissionable material is needed [ ] It produces vast amounts of energy [ ] Nuclear power plants are cheap to build
The waste produced by nuclear fission can stay radioactive for centuries and as such can be costly to dispose of